|
|
产品展示
|
|
 |
| Eco-friendly , Compact |
|
|
* Max. inlet pressure: 2.0 MPa
* Direct-acting type
* Wetted parts SCS14A/SUS316 stainless steel
* Material identification for recycling
* Stable pressure control by pressure balance structure | |
 | |
|
| Feature |
Direct-acting type / Wetted parts: SCS14A/SUS316 stainless |
| Type |
Direct-acting type |
| Specifications |
Application |
Cold and hot water , Air , Non-corrosive gases , Steam for washing or sterilization |
| Inlet pressure |
Max. 2.0MPa |
| Reduced pressure |
0.02 - 0.5MPa(*1) |
| Connection |
JIS Rc |
| Min. differential pressure |
0.05MPa |
| Max. pressure reduction ratio(*2) |
20:1 |
| Max. temperature |
90 degree(C) |
| Material |
Body |
Stainless steel |
| Valve & seat |
Synthetic rubber & stainless steel |
| Diaphragm |
Synthetic rubber & PTFE | | |
|
*1 Reduced pressure
(A): 0.02-0.1 MPa
(B): 0.1-0.25 MPa
(C): 0.25-0.5 MPa
*2 Max. pressure reduction ratio
cool and warm water --- 10:1
air, carbon dioxide, nitrogen gas --- 20:1
* The maximum pressure for steam is 0.2 MPa
* The maximum temperatue for steam is 130 degree(C) for 30 minutes use.
And 4 hours interval must be taken for re-use. | | | |
|
Enter a value in the following field for a calculation of flow rate.
Capacity may vary according to the installation condition.
Please contact the international Dept. when placing an order. | |
|
|
 |
|
|
|
| Size |
L (mm) |
H (mm) |
Weight (kg) |
Cv value |
| 15A |
85 |
136 |
1.2 |
0.4 |
| 20A |
85 |
136 |
1.1 |
0.6 |
| 25A |
85 |
136 |
1 |
0.8 | | |
|
|
|
|
